Notifications
Back

Business Area

Air Compressor & Facilities

Pneumatic Smart Factory System

Air Compressor & Facilities

More

Desiccant Air Dryer

Absorbent application be appropriate for dehumidification, and Keep Accurate dew point and digital automated operation. The parts of dry air is used for renewable source in order to maintain accurate dew point. Furthermore, This is high quality combined with automatic and digital operation system. The use of the best parts ensures the machine will operate with no fine fault.

YAD-Series

Heatless Desiccant Air Dryer

YAD-Series AIR DRYER is suitable performance for small and middle capacity compressed air dehumidifying. And also the structure is simple and easy to maintain without electrical control panel.

I YAD-Series structure and feature
  • Ensure reliable dew point
  • combined with automatic and digital operation system
  • Easy structure and maintenance.
  • Operating cost reduction effect by dew point operation(PPD-2)
I General design condition
  • Inlet –air pressure : 7.0kg/ใŽ (STD), 10~50kg/ใŽ (OPN)
  • Inlet –air temperature : max, 40โ„ƒ
  • Outlet temperature : -40โ„ƒ(STD), -75โ„ƒ(OPN)
  • Operating cycle : 10min/cycle
I YAD-Series Dehumidification and operating principles

Compressed air is discharged from the air compressor (for large 2-Way Valve) 3-Way shuttle valve with the inlet valve of the air dryer, and passing through required in flow rate and in contact time, is supplied by dew point of the dried compressed air (typically 40 โ„ƒ ~ -70 โ„ƒ). Dehumidification and regeneration cycle is processing for 2-5 minutes, depending on the dew point. And while one adsorption tower (A) is in dehumidifying action process, outlet part of the dehumidified air in the other adsorption tower (B) is passing through the pressure reducing valve and the orifice. As a result, discharging absorbed moisture into the atmosphere. The advantage of YAD-Series AIR DRYER maximize energy savings effect can operate not only in control and regeneration air at site, but also With a dew point control operation, depending on the condition of inlet air compression. It is also designed by sensing outlet pressure condition at alltimes In addition, pressure drop was designed to prevent in advance.

I Inlet pressure Modification factor
Pressure (kg/cm²)
4.2
5.6
3.6
7
8.4
9.1
9.9
10.5
11.3
12.7
14
15.8
17.6
19.3
21
Modification factor
0.65
0.83
0.91
1
1.16
1.26
1.33
1.43
1.52
1.65
1.88
2.08
2.27
2.5
2


I Technical Data (YAD-10~YAD-600)
MODEL
CAPACITY
(Nm³/hr)
DESICCANT
(Kg/2towers)
CONNECTION
DIMENSION(mm)
WEIGHT
(kgs)
L
W
H
YAD-5
36
15
15A
650
450
1,085
50
YAD-10
90
22
20A
712
500
1,710
93
YAD-20
174
44
20A
768
500
1,930
145
YAD-30
246
70
25A
834
600
1,915
234
YAD-50
528
110
40A
963
700
2,030
405
YAD-75
660
170
40A
1,066
750
2,220
450
YAD-100
840
214
50A
1,220
850
2,180
650
YAD-150
1,247
280
65A
1,460
850
2,350
810
YAD-200
1,700
440
80A
1,600
1,050
2,410
1,230
YAD-250
2,100
530
80A
1,650
1,100
2,310
1,300
YAD-300
2,510
720
80A
1,850
1,350
2,410
1,650
YAD-400
3,400
1,000
100A
2,000
1,500
2,750
2,000
YAD-500
4,200
1,300
100A
2,300
1,600
2,750
2,500
YAD-600
5,100
1,620
125A
2,500
1,600
2,860
3,000
YHP-Series

Heater External Desiccant Air Dryer

YHP-Series AIR DRYER is suitable performance for middle and full-sized capacity compressed air dehumidifying. And also reproduction air of a high temperature through the electric heater is supplying stable and lower dew point compressed air by absorbent.. The energy savings can be expected by various selection optional application.

I YHP-Series structure and feature
  • Ensure reliable dew point (-40โ„ƒ~95โ„ƒ)
  • The latest digital driving operation (option)
  • Excellent durability Belt application
  • Operating cost reduction effect by dew point operation(PPD-2).
  • Operating cost reduction effect by PPR-System.
I General design condition
  • Inlet –air pressure: 7.0kg/ใŽ (STD), 10~50kg/ใŽ (OPN)
  • Inlet –air temperature: max. 40โ„ƒ
  • Outlet dew point temperature : -40โ„ƒ(STD), -75โ„ƒ(OPN)
  • Operation cycle : 8hrs/cycle
I YHP-Series Dehumidification and operating principles.

Compressed air is discharged from the air compressor (for large 2-Way Valve) 3-Way shuttle valve with the inlet valve of the air dryer, and passing through required in flow rate and in contact time, is supplied by dew point of the dried compressed air (typically 40 โ„ƒ ~ -95 โ„ƒ). Dehumidification and regeneration cycle is processing for 8 hours, depending on the dew point. And while one adsorption tower (A) is in dehumidifying action process, outlet part of the dehumidified air in the other adsorption tower (B) is passing through the pressure reducing valve and the orifice and then heating by electric heater . As a result, regenerate the absorbent by removing the moisture absorbed. The advantage of YHP-Series AIR DRYER maximize energy savings effect can select control method in option, depending on the condition of inlet air compression

I Inlet pressure Modification factor
Pressure (kg/cm²)
4.2
5.6
6.3
7
8.4
9.1
9.9
10.5
11.3
12.7
14
15.8
17.6
19.3
21
Modification factor
0.65
0.83
0.91
1
1.16
1.26
1.33
1.43
1.52
1.65
1.88
2.08
2.27
2.5
2.7
I Technical Data (YHP-30~YHP-850)
MODEL
CAPACITY
(Nm³/hr)
DESICCANT
(Kg/2towers)
CONNECTION
E.H
DIMENSION(mm)
WEIGHT
(kgs)
kW
L
W
H
YHP-30
216
100
25A
3
1,400
800
2,000
320
YHP-50
520
130
40A
3
1,550
900
1,960
450
YHP-75
600
220
50A
5
1,500
900
2,220
700
YHP-100
920
330
50A
7.5
1,700
1,050
2,400
900
YHP-150
1,302
460
65A
10.5
1,900
1,100
2,480
1200
YHP-200
1,590
562
80A
11.5
1,950
1,200
2,530
1,400
YHP-250
1,900
680
80A
13.5
2,200
1,200
2,530
1,600
YHP-300
2,730
960
100A
22
2,300
1,400
2,700
2,200
YHP-350
3,120
1,100
100A
25
2,400
1,450
2,765
2,400
YHP-500
4,440
1,600
125A
35
2,800
1,650
2,860
3,050
YHP-600
5,400
1,900
150A
40
3,000
1,700
3,030
5,000
YHP-650
6,000
2,120
150A
45
3,200
1,850
3,070
5,300
YHP-750
6,800
2,400
150A
50
3,500
1,900
3,000
5,600
YHP-850
7,700
2,690
150A
60
3,600
2,000
3,100
6,150
YOM-Series

Oilless Master Air Dryer

It is possible to remove smell, moisture perfectly and can be installed regardless of Oil-lubricated, non-contained compressed air LINE.

I YOM-Series structure and feature
  • High Purity(100.000 times)
    Compressed air through OILLESS MASTER is suitable for in the fields Drug, pharmaceutical, electronic, semiconductor, mechanical, Since clean air more then 100,000times
  • Complete oil removal (0.01ppm below)
    Remove or less 0.01ppmregardless of the oil content of compressed air
  • Complete oil removal (removal smell)
    Unpleasant smell of charred air and oil from the COMPRESSOR will be removed by specially ordered ACTIVATED ALUMINA.
  • Drying dew point (Complete oil removal moisture 99.999%)
    By drying moisture HEATLESS way and filling the absorbent on TOWER A.B can get a second dry air outlet dew point 40 โ„ƒ ~ -70 โ„ƒ
  • Area of Installatio
    There is nothing to be needed additional devices due to configure all devices and minimize area of installation on SKID.
I General design condition
  • Inlet –air pressure : 7Kgf/ใŽ (STD)
  • Inlet –air temperature : 40โ„ƒBELOW(STD)
  • Outlet dew point temperature: -40โ„ƒ(STD), -70โ„ƒ(STD)
  • Operation Hour 10MIN/1Cycle
  • Relative humidity: 100%
  • PURGE Pressure: 3.2Kgf/ใŽ (STD)
  • DESICCANT : SOMA(1TOWER)...(STD) / ACTIVATED ALUMINA(STD) / MOLECULAR SIEVES(OPTION)
I Technical Data (YOM-10~YOM-800)
MODEL
CAPACITY
(Nm³/hr)
DESICCANT
CONNECTION
DIMENSION(mm)
WEIGHT
(kgs)
A.A
SOMA
L
W
H
YOM-10
66
22
10
20A
900
550
1,660
130
YOM-20
132
44
20
20A
1,000
550
1,960
203
YOM-30
216
70
30
25A
1,200
700
2,050
330
YOM-50
342
110
43
40A
1,300
750
2,100
560
YOM-75
690
210
70
50A
1,700
860
2,300
880
YOM-100
876
280
90
50A
1,800
860
2,250
1,050
YOM-150
1,410
440
120
80A
2,200
1,100
2,300
1,600
YOM-200
1,680
530
160
80A
2,300
1,100
2,200
1,800
YOM-250
1,920
600
200
80A
2,400
1,250
2,400
2,000
YOM-300
2,340
720
250
80A
2,400
1,400
2,440
2,200
YOM-400
3,120
1,000
320
80A
2,500
1,500
2,600
2,600
YOM-500
4,200
1,300
390
100A
2,500
1,600
2,700
3,200
YOM-600
5,100
1,600
460
150A
3,100
1,900
2,700
3,900
YOM-800
6,480
2,000
600
150A
3,300
1,500
2,850
5,200
  1. It could be changed by our development.
  2. The design pressure over 0.97Mpa products is produced by the order.

COPYRIGHT © SHINHAN AIRRO CO., LTD. ALL RIGHTS RESERVED.

Address : 29, Geumsan 4-gil, Dong-myeon, Yangsan-si, Gyeongsangnam-do, 
Republic of Korea
Tel. +82-55-604-8600 / Fax. +82-55-365-1450 / Email : biz@shairro.com

COPYRIGHT © SHINHAN AIRRO CO., LTD. ALL RIGHTS RESERVED.

About Us

Business Area

PR Center

Customer Center